Chip Conveyor Belts
Applications:
The 1.25”- 1.50″ – 2.50″ Chip Conveyor Belt is ideal for handling parts, stampings, die castings, screws, scrap, chips,
turnings, material wet or dry, horizontal or elevating, single or multiple unit systems.
You will find this belting being used in the following industries:
- Small Manufacturers
- CNC Turning & Milling Centers
Features:
Steel hinged conveyor belting available in 1-1/4″, 1-1/2″, and 2 1/2″ pitch. Offset interlocking side wings are welded. These belts are interchangeable with most major manufacturers.
– Material 14 GA. (.075)
– Available in Any Width
– P = Optional Perforated
– D = Optional Dimpled
– DP = Optional Dimpled and PerforatedWings
– .75= 3/4 High 14 Ga. Offset Welded To Pan
– .8R= Optional 13/16 High 11 Ga. Offset RadialChain
– Hardened
– Roller: Flat Face 3/4 Dia. x 3/8 Wide
– Split Roller Bushing
– Links: 3/32 Thick x 9/16 High
Pin
– 3/16 Dia. CR1044/1045
– Locking System – Welded Washer
– Belt Splice 3/32 Cotter Pin
Belt Pull – 650 Lbs.
Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/16 Thick x 1″ Wide, Any Spacing

1-1/2″ Pitch Steel Belt
– Material 14 GA. (.075)
– Available in Any Width
– P = Optional Perforated
– D = Optional Dimpled
– DP = Optional Dimpled and PerforatedWings
– 1R= 1.00 High 11 Ga. Offset Radial
– .75R= Optional 3/4 High 11 Ga. Offset RadialChain
– Hardened
– Roller: Flat Face 7/8 Dia. x 1/2 Wide
– Split Roller Bushing
– Links: 1/8 Thick x 11/16 High
Pin
– 15/64 Dia. (.234) CR1044/1045
– Locking System – 3/32 Cotter Pin
Belt Pull – 1,000 Lbs.
Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/16 Thick x 1″ Wide, Any Spacing

2-1/2″ Pitch Steel Belt
2-1/2″ Pitch Steel Belt Configure a Belt and Request a Quote Belt # 2.50X-Width-Wing-2E1-3
– Material 1/8
– Available in Any Width of 3″ Increments
– D = Optional Dimpled
– DP = Optional Dimpled and PerforatedWings
– 1/8 Thick x 1-1/2 High – Offset Welded To PanChain
– Roller: Hardened – Flat Face 1-9/16 Dia. x 1″ Wide
– Hardened Split Roller Bushing
– Links: 5/32 Thick x 1″ High
Pin
– 3/8 Dia. CR1044/1045
– Locking System – 1/8 Cotter Pin
Belt Pull – 2,500 Lbs.
Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/8 Thick x 1-3/4″ Wide, Any Spacing
