Two models of Loop Belt truck-mounted conveyors offer contractors concrete placing options with set-up capability in an area with less than 18 ft. of overhead clearance.
- LB32T4 has a horizontal reach of 32 meters, four telescopic sections, an 18-in.-wide conveyor that will handle 4-in. aggregates and up to 360 cu. yd. per hour capacity
- The LB40T5 has a horizontal reach of 40 meters, five telescopic sections, a 20-in.-wide conveyor that will handle aggregates up to 6 in., and up to 480 cu. yd. per hour capacity
- Upper conveyor section is fixed at a negative angle to provide a better belt transition and material flow into the transfer area
- Free-floating hinge and control arm allow for full retraction of the hydraulic cylinders
- Feed conveyor contact with the ground is under self-weight only
- Minor variations in machine leveling, due to outrigger pad settlement, are automatically compensated for via control arm float position
- Hydraulic outriggers
- Llattice boom sections are fabricated from high strength steel
- Legal axle weights in most states
- Traction-drive frame structure
Read more: Loop Belt Truck Mounted Conveyors
