Chip Conveyor Belts Old

Applications

The 1.25”- 1.50″ – 2.50″ Chip Conveyor Belt is ideal for handling parts, stampings, die castings, screws, scrap, chips, turnings, material wet or dry, horizontal or elevating, single or multiple unit systems.

You will find this belting being used in the following industries:

Small Manufacturers

CNC Turning & Milling Centers

Features

Steel hinged conveyor belting available in 1-1/4″, 1-1/2″, and 2 1/2″ pitch. Offset interlocking side wings are welded. These belts are interchangeable with most major manufacturers

1-1/4″ Pitch Steel Belt

Belt # 1.25X-Width-Wing-1E1-4

1_and_quarter_pitch_steel_sheet — *Click to Enlarge Mechanical Drawing*

Configure a Belt and Request a Quote

Pan/Hinge
– Material 14 GA. (.075)
– Available in Any Width
– P = Optional Perforated
– D = Optional Dimpled
– PD = Optional Perforated and Dimpled

Wings
– .75= 3/4 High 14 Ga. Offset Welded To Pan
– .8R= Optional 13/16 High 11 Ga. Offset Radial

Chain
– Hardened Roller: Flat Face 3/4 Dia. x 3/8 Wide
– Split Roller Bushing
– Links: 3/32 Thick x 9/16 High

Pin
– 3/16 Dia. CR1044/1045
– Locking System – Welded Washer
– Belt Splice 3/32 Cotter Pin

Belt Pull – 650 Lbs.

Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/16 Thick x 1″ Wide, Any Spacing

1-1/2″ Pitch Steel Belt

Belt # 1.50X-Width-Wing-1E5-3

Click to Enlarge Drawing

Configure a Belt and Request a Quote

Pan/Hinge
– Material 14 GA. (.075)
– Available in Any Width
– P = Optional Perforated
– D = Optional Dimpled
– PD = Optional Perforated and Dimpled

Wings
– 1R= 1.00 High 11 Ga. Offset Radial
– .75R= Optional 3/4 High 11 Ga. Offset Radial

Chain
– Hardened Roller: Flat Face 7/8 Dia. x 1/2 Wide
– Split Roller Bushing
– Links: 1/8 Thick x 11/16 High

Pin
– 15/64 Dia. (.234) CR1044/1045
– Pin Locking System – 3/32 Cotter Pin

Belt Pull – 1,000 Lbs.

Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/16 Thick x 1″ Wide, Any Spacing

Click to Enlarge Drawing & Images

2-1/2″ Pitch Steel Belt

Belt # 2.50X-Width-Wing-2E1-3

Click to Enlarge Drawing

Configure a Belt and Request a Quote

Pan/Hinge
– Material 1/8
– Available in Any Width of 3″ Increments
– D = Optional Dimpled
– PD = Optional Perforated and Dimpled

Wings
– 1/8 Thick x 1-1/2 High – Offset Welded To Pan

Chain
– Roller: Hardened – Flat Face 1-9/16 Dia. x 1″ Wide
– Hardened Split Roller Bushing
– Links: 5/32 Thick x 1″ High

Pin
– 3/8 Dia. CR1044/1045
– Locking System – 1/8 Cotter Pin

Belt Pull – 2,500 Lbs.

Modifications
– Optional Bar Cleats, Any Size, Any Spacing.
– Optional Cover Plates, 3/8 Thick x 1-3/4″ Wide, Any Spacing