Steel Hinge Belts

May Conveyor Steel Hinge Conveyor Belt Section

Applications

The 6”-9”Steel Hinge Belt is ideal for handling parts, stampings, die castings, screws, scrap, chips, turnings, material wet or dry, horizontal or elevating, single or multiple unit systems.

You will find these belts being used in the following industries:

Waste & Recycling

Stamping

Stamping

Manufacturing

OEM

Foundry & Mining

Automotive

Specifications

Pan/Hinge
– 229 = 1/4 Thick
– 179 = 3/16 Thick
– P = Optional Perforated
– D = Optional Dimpled
– DP = Optional Dimpled and Perforated

Belt Width – Available in Any Width of 6″ Increments

Wings
– 3 = 3″ High x 1/4 Offset Welded To Pan
– 4 = 4″ High x 1/4 Offset Welded To Pan

Pin – 3/4 Diameter CR1044/1045 End Machined for Locking System. Belt Width Cover Tube.

Modifications – Angle Cleats, Bar Cleats, Impact Shoes/Pads, Top Plates, C-Channel Reinforcements, Trapezoid Reinforcements. Any size, any Spacing.

May Conveyor 6 inch chain

Pan/Hinge
– 229 = 1/4 Thick
– 179 = 3/16 Thick
– P = Optional Perforated
– D = Optional Dimpled
– DP = Optional Dimpled and Perforated

Belt Width – Available in Any Width of 6″ Increments

Wings
– 3 = 3″ High x 1/4 Offset Welded To Pan
– 4 = 4″ High x 1/4 Offset Welded To Pan
– 6 = 6″ High x 1/4 Offset Welded to Pan

Pin – 3/4 Diameter CR1044/1045 End Machined for Locking System. Belt Width Cover Tube.

Modifications – Angle Cleats, Bar Cleats, Impact Shoes/Pads, Top Plates, C-Channel Reinforcements, Trapezoid Reinforcements. Any size, and Spacing.

May Conveyor 9 inch chain