Chains

Chains

Applications

These chains have been designed specifically for chain conveyor systems. It consists of a series of journal bearings that are held together by constraining link plates. Each bearing consists of a pin and a bush on which the chain roller revolves. Good uses for a conveyor chain are: Mining, Food processing, Sewage treatment, Timber harvesting, Agriculture, Textile machinery, Automobile plants, Cement works, and Material handling.

 

You can find chains being used in the following industries:

  • Waste and Recycling
  • Machining
  • Stamping
  • Manufacturing
  • OEM
  • Foundry and Mining
  • Automotive
  • Food and Tobacco

Specifications

6″ Chain

9″ Chain

6″ Chain Specification Chart

Request a Quote

Chain Style
Roller Bushing Chain Bar
Belt Pull Locking System
6C2 Hardened, 2-1/2 Dia. Flat Face
1-1/16 Tread, 1″ ID.
Hardened, 1″ OD, 3/4 ID
1-3/4 Long, Locking Flats
1/4 x 1-3/4 Mat’l HR M1044 6,675 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
6E3 Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID.
Hardened, 1-1/8 OD, 3/4 ID
2-1/16 Long, Locking Flats
1/4 x 2″ Mat’l HR M1044 9,000 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
6EW Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID.
Hardened, 1-1/8 OD, 3/4 ID
2-5/16 Long, Locking Flats
3/8 x 2″ Mat’l HR M1044 12,750 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
6E3RB Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID.  Roller Bearings
Hardened, 1-1/8 OD, 3/4 ID
2-1/16 Long, Locking Flats
1/4 x 2″ Mat’l HR M1044 9,000 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
6F4RB Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID. Roller Bearings
Hardened, 1-1/8 OD, 3/4 ID
2-3/4 Long, Locking Flats
3/8 x 2″ Mat’l HR M1044 12,750 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication

*Pins for All 6″ Pitch Chains are 3/4 Dia. Cold Headed; Machined for Locking System

Available Modifications:
Attachments for “Z” Apron Pan
Attachments for Beaded Apron Pan
Extended inner chain Bar/Wing

9″ Chain Specification Chart

Request a Quote

Chain Style
Roller Bushing Chain Bar
Belt Pull
9E3 Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID.
Hardened, 1-1/8 OD, 3/4 ID
2-1/16 Long, Locking Flats
1/4 x 2″ Mat’l HR M1044 9,000 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
9F2 Hardened, 3-1/2 Dia. Single Flange
1-1/4 Tread, 1-1/8 ID.
Hardened, 1-1/8 OD, 3/4 ID
2-3/4 Long, Locking Flats
3/8 x 2″ Mat’l HR M1044 12,750 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
9F4 Hardened, 4″ Dia. Single Flange
1-7/16 Tread, 1-1/8 ID.
Hardened, 1-1/8 OD, 3/4 ID
2-3/4 Long, Locking Flats
3/8 x 2″ Mat’l HR M1044 12,750 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
9E3RB Hardened, 3″ Dia. Single Flange
1-1/8 Tread, 1-1/8 ID.  Roller Bearings
Hardened, 1-1/8 OD, 3/4 ID
2-1/16 Long, Locking Flats
1/4 x 2″ Mat’l HR M1044 9,000 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication
9F4RB Hardened, 4″ Dia. Single Flange
1-7/16 Tread, 1-1/8 ID. Roller Bearings
Hardened, 1-1/8 OD, 3/4 ID
2-3/4 Long, Locking Flats
3/8 x 2″ Mat’l HR M1044 12,750 Lbs. 2-Lock Nut
3-Cotter Pin
5-Lubrication

*Pins for All 9″ Pitch Chains are 3/4 Dia. Cold Headed; Machined for Locking System

Available Modifications:
Attachments for “Z” Apron Pan
Attachments for Beaded Apron Pan
Extended inner chain Bar/Wing